LINTTL3 LIN 2.1/SAE J2602 Transceiver LIN Bus Module Master-Slave Protocol Controller 20KBD UART TTL232 RS485 K-line Can Data Analyzer

LINTTL3 LIN 2.1/SAE J2602 Transceiver LIN Bus Module Master-Slave Protocol Controller 20KBD UART TTL232 RS485 K-line Can Data Analyzer

  • Model: LINTTL3
  • Availability: In stock
  • Weight: 0.003Kg
US$3.99
  • Description
  • Datasheet Document Download
  • Guidance videos
  • Reviews
  • Shipping & Returns


1.Description:

It is a TTL_UART to LIN bus module.The module uses TJA1021 IC.It is mainly used for communication monitoring and maintenance of LIN bus equipment.


2.Feature:

1 Pure data signal conversion
2 Its data is stable
3 It has a green power indicator that shows the working status.
4 It can monitor and maintain LIN bus device communication.




3.Description:

1 Product Name:TTL_UART to LIN Bus Module
2 Product Chip:TJA1021
(Has been changed to fully compatible and more stable performance SIT1021T)
3 Working Voltage:DC 12V/24V
4 Work Temperature:-25℃~85℃
5 Work Humidity:5%~95%RH
6 Size:43*20*12mm
7 Weight : 7.3g



4.Specific Function Introduction:

1 The measured baud rate of the module can reach 57600bps,and the recommended maximum operating frequency is less than 20Kbps.
2 This module is just a level conversion module and does not participate in conversion analysis such as software protocols.
3 When the module is connected to the computer's COM port,the computer can receive data,but it cannot communicate with your slave device as a host.The computer's com port cannot generate the 13-bit start bit in the LIN protocol,but it can be connected to a development board such as a microcontroller.
4 Power supply anti-reverse connection protection, LIN bus anti-surge protection
6 Compatible with 3.3V/5V microcontroller system




Pin description:

VIN: Power supply positive pole (DC 12V/24V)
INH:Used in host mode (please refer to the TJA1021 PDF)
LIN :LIN BUS
GND: Power supply negative pole
TX :TTL serial port data output
SLP :Sleep
RX : TTL serial port data input
GND:Ground wire(Connected to MCU)





5.Package:

1pcs TTL_UART to LIN Bus Module(Upgraded version)








Choose a ranking for this item. 1 star is the worst and 5 stars is the best.





NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed

* Delivery Time.
We need 1-2 days to process your order before shipping.There are two shipping methoed. Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.Slow Delivery: The delivery time for US, European countries the delivery will take 10-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 4 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.

payment
Copyright © 2024 Eletechsup All Rights Reserved.