ETVOD08 12V 8CH PNP DI Digital Analog Ethernet Remote I/O Modules Modbus RTU TCP/IP MQTT Network Controller 4-20MA 0-10V DAC Output Board

ETVOD08 12V 8CH PNP DI Digital Analog Ethernet Remote I/O Modules Modbus RTU TCP/IP MQTT Network Controller 4-20MA 0-10V DAC Output Board

  • Model: ETVOD08_PNP_12V
  • Availability: In stock
  • Weight: 0.2Kg
US$32.99
  • Description
  • Datasheet Document Download
  • Guidance videos
  • Reviews
  • Shipping & Returns
Package inlcuded:

1PCS DC 12V/24V 4/8/16Ch ETAIC04 ETVOD08 ETIOE16 Network Ethernet RS485 Digital Analog Remote IO Module

(There are multiple versions, please choose the version you need)




Features:

4ch Version:


1 Working voltage: DC 12V (12V version); 24V (24V version)
2 Working current (12V): Standby 18MA, single relay ON current 35MA, maximum working current 160MA (4 relay ON)
3 4x photoelectrically isolated input ports (NPN low-level active), the input-output relationship can be set to Unrelated (default)/Self- locking/Interlocking/Momentary/Interlocking(2 ch)/Output=Input.
4x relay output ports,4x NPN switch input ports, 4x 0/4-20MA input ports, 4x 0-5V /10V input port
5 Communication interface: RS485/Ethernet (optional)
6 Standard MOSBUS instructions: Write 05/06/15/16, Read 01/02/03/04
7 Set the Slave Address through the DIP switch (A0-A5), which can support up to 63 devices in parallel.
8 Through the DIP switch (SW1=ON), the Ethernet and RS485 ports can be set as Ethernet to RS485 servers.
9 The default baud rate is 9600BPS, the baud rate can be selected through jumpers 2400 4800 19200 38400 57600 115200BPS
10 You can choose the check mode as No Parity, Even Parity and Odd Parityk.
11 You can set the data sending return time, the maximum can be set to 1000ms
12 Size :123*72*22mm (only board),126*88*45mm (with din rail box):
13 Weight: 113g (only board);204g (with din rail box)
14Maximum load: 10A/250VAC, 10A/125VAC, 10A /30VDC, 10A /28VDC, 10A /12VDC


8ch Version:

1 Working voltage: DC 12V (12V version); 24V (24V version)
2 Working current (12V): Standby 15MA, single relay ON current 35MA, maximum working current 300MA (8 relay ON)
3 8x photoelectrically isolated input ports ( NPN/PNP), the input-output relationship can be set to Unrelated (default)/Self- locking/Interlocking/Momentary/Interlocking(2 ch)/Output=Input.
8x relay output ports, 1x 0-5V/10V output port, 8x NPN/PNP switch input ports, 4x 0/4-20MA input ports, 4x 0-5V /10V input port
5 Communication interface: RS485/Ethernet (optional)
6 Standard MOSBUS instructions: Write 05/06/15/16, Read 01/02/03/04
7 Set the Slave Address through the DIP switch (A0-A5), which can support up to 63 devices in parallel.
8 Through the DIP switch (SW1=ON), the Ethernet and RS485 ports can be set as Ethernet to RS485 servers.
9 The default baud rate is 9600BPS, the baud rate can be selected through jumpers 2400 4800 19200 38400 57600 115200BPS
10 You can choose the check mode as No Parity, Even Parity and Odd Parity.
11 You can set the data sending return time, the maximum can be set to 1000ms
12 Size :188*72*22mm (only board),191*88*45mm (with din rail box):
13 Weight: 187g (only board);318g (with din rail box)
14Maximum load: 10A/250VAC, 10A/125VAC, 10A /30VDC, 10A /28VDC, 10A /12VDC

16ch Version:

1 Working voltage: DC 12V (12V version); 24V (24V version)
2 Working current (12V): Standby 15MA, single relay ON current 35MA, maximum working current 575MA (16 relay ON)
3 16 photoelectrically isolated input ports (NPN low-level active), the input-output relationship can be set to Unrelated (default)/Self- locking/Interlocking/Momentary/Interlocking(2 ch)/Output=Input.
16x relay output ports, 1x 0-5V/10V output port, 1x 0/4-20MA output port, 16x NPN switch input ports, 4x 0/4-20MA input ports, 4x 0-5V /10V input port
5 Communication interface: RS485/Ethernet (optional)
6 Standard MOSBUS instructions: Write 05/06/15/16, Read 01/02/03/04
7 Set the Slave Address through the DIP switch (A0-A5), which can support up to 63 devices in parallel.
8 Through the DIP switch (SW1=ON), the Ethernet and RS485 ports can be set as Ethernet to RS485 servers.
9 The default baud rate is 9600BPS, the baud rate can be selected through jumpers 2400 4800 19200 38400 57600 115200BPS
10 You can choose the check mode as No Parity, Even Parity and Odd Parity.
11 You can set the data sending return time, the maximum can be set to 1000ms
12 Size :265*90*22mm (only board) 268*102*45mm (with din rail box):
13 Weight: 330g (only board); 558g (with din rail box)
14Maximum load: 10A/250VAC, 10A/125VAC, 10A /30VDC, 10A /28VDC, 10A /12VDC


Please contact me for detailed information!







 

Choose a ranking for this item. 1 star is the worst and 5 stars is the best.





NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed

* Delivery Time.
We need 1-2 days to process your order before shipping.There are two shipping methoed. Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.Slow Delivery: The delivery time for US, European countries the delivery will take 10-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 4 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.

payment
Copyright © 2024 Eletechsup All Rights Reserved.