LD24AJTA DC 12V 24V LED Dimming Control 0-910MA Constant Current Adjustable PWM LED Driver Module LD24AJTA_MINI Board for Arduino ESP32

LD24AJTA DC 12V 24V LED Dimming Control 0-910MA Constant Current Adjustable PWM LED Driver Module LD24AJTA_MINI Board for Arduino ESP32

  • Model: LD24AJTA_MINI
  • Availability: In stock
  • Weight: 0.001Kg
US$0.99
  • Description
  • Datasheet Document Download
  • Guidance videos
  • Reviews
  • Shipping & Returns

The LD24AJTA_MINI is a continuous conduction mode inductive step-down converter, designed for driving single or multiple series connected LED fficiently from a voltage source higher than the total LED chain voltage. The device operates from an input supply between 6V and 25V and provides an externally adjustable output current of up to 910mA. Depending upon the supply voltage and external components, the LD24AJTA_MINI can provide more than 22 watts of output power.


Description:

6-25V 910mA Step-down High Brightness LED Driver with 5000:1 Dimming
Working voltage : DC 6-25V(Perfect for 6V 9V 12V 18V 24V LED Driver)
Output Current: 30-910MA;By changing the RCS resistance, the maximum current can reach 1.2A
Maximum output power: 22W(24V)
Current regulation: 1 through adjustable resistance; 2 through PWM control
Single pin on/off and brightness control using DC voltage or PWM
Up to 1MHz switching frequency
Typical 5% output current accuracy
Inherent open-circuit LED protection
High efficiency (up to 97%)
High-Side Current Sense
Hysteretic Control: No Compensation
Adjustable Constant LED Current

Mini Size : 18mm x 15mm x 6.5mm
Weight : 2.1g

 
Typical application:
Low voltage halogen replacement LEDs
Automotive lighting
Low voltage industrial lighting
LED back-up lighting
Illuminated signs
SELV lighting
LCD TV backlighting

 
By modifying the RCS potentiometer, the maximum output current can be adjusted to 1.2A (pay attention to enhance heat dissipation)
 
 
 
Application 1: Wiring in accordance with the following figure, use a suitable screwdriver gently and slowly rotate the adjustable resistance.
 
Application 2: Ignore the adjustable resistance, control the output current through the PWM port, the current is 0-910MA adjustable
Application 3 : Add an enable control switch based on application 1.
 
 
 
 
 

 

Choose a ranking for this item. 1 star is the worst and 5 stars is the best.





NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed

* Delivery Time.
We need 1-2 days to process your order before shipping.There are two shipping methoed. Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.Slow Delivery: The delivery time for US, European countries the delivery will take 10-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 4 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.

payment
Copyright © 2024 Eletechsup All Rights Reserved.